CARE & MAINTENANCE
How to Make the
most of your Fire
Solid fuel fired appliances, like any other machines, work better and last longer when correctly installed, burn the right fuel and are properly maintained.
It is therefore important to ensure that new installations are carried out by recognised and established heating engineers and serviced by competent companies working in this area.
Keep warm and secure by following these simple steps.
Next 
STEP 1:
The Right Fuel
To get the best value for money it is important to burn the right fuel in your appliance – choose a reputable brand that is tried and trusted. Make sure not to burn fuels that are wet and when using closed appliances use the slow burning fuels (anthracites and manufactured fuels) that are particularly suited to closed appliances.
Previous
Next 
STEP 2:
Air Supply
All fuels require an adequate supply of air to make them burn correctly. This is not a problem with open fires as there is plenty of air available.
However in the case of closed appliances, like room heaters or cookers, the following two issues can occur:
1. Too little air because the settings are closed off, or. In the first case, you need to ensure that a good fire is set in your room heater or cooker before closing off the air supply to allow the fire to ‘bank' - failure to do this will create tarry deposits in your chimney.
Previous
Next 
STEP 2:
Air Supply
2. Where there is too little fresh air going into the room from outside, fumes that are harmful to your family may escape into the room. If you have double glazing or draught proofing you will need to allow air to enter the room in which the appliance is installed via an air brick or grille. Never seal air bricks or grills up as you may be putting your family at risk.
Previous
Next 
STEP 3:
Flue Cleaning
Many solid fuel fired appliances like room heaters and cookers have flueways through which the hot gases pass to the chimney. These flueways should be swept clean every month to remove any soot or ash. Some stoves and roomheaters have a removable/drop down plate in the top of the fire box - this should also be removed and cleaned once a month. Remember to always let the fire go out the day before cleaning.
Previous
Next 
STEP 4:
Chimney Sweeping
All chimneys must be swept at least once a year, preferably by a trusted sweep. If your appliance is used continuously throughout the year or burns wood or turf more frequent sweeping is recommended.
The best time to have your chimney swept is at the start of the heating season. Remember these recommendations apply even if you burn smokeless fuels.
Previous
Next 
STEP 5:
Ash Removal
If ash is allowed to build up within the appliance the fire will not burn properly and the appliance may be damaged. Generally speaking, the appliance should be de-ashed before being filled with new fuel. The ashpan should be gently removed from the ash pit area and emptied into a suitable container. A hot ash carrier (a metal box with a lid) is ideal for this purpose. The ash pan should be replaced, the fire bed de-ashed with a poker or the de-ashing mechanism on the appliance.
Previous
Next 
STEP 6:
Fireguards
We recommend that a fireguard be used with all open fires.
Previous